Night report
The Night report page is the morning-after summary: what Starship did on one night, on one page. Open it from Night report in the left menu. Nothing on this page moves equipment; it only reads what was recorded.
What a "night" is
A night runs from noon to noon at your site, and it is named after the date it starts on. The frames you take at 2 am on the 12th belong to the night of the 11th.
The header shows this as Night of 11-11 → 11-12. While that night is still running it adds (in progress), and the numbers keep growing as frames come in.
Finding a night
- ‹ and › step one night back or forward.
- Last night with frames jumps to the most recent night that has any frames. Use it after a run of cloudy nights.
- Nights with frames… lists every recorded night that has frames, newest first, with the number of frames. Pick one to open it.
- Refresh reads the night again.
What the page shows
- Summary: frames kept, frames rejected, total exposure time, the first and last time something happened, how many times the run was suspended for weather, alerts sent, and the typical guiding error.
- Frames: one line per target and filter with the number of frames, the exposure and the total time.
- Focus (star size): how the star size changed through the night. A steady line is good focus; a rising line means the focus drifted or the seeing got worse.
- Guiding RMS: the guiding error through the night, with the typical and the worst-case value, and a list of the times the guide star was lost.
- Timeline: the main events in order, such as a sequence starting, pausing or finishing, a pause for weather and the restart after it, the sky turning unsafe or safe again, a blockscript session changing state, and a device that had to be recovered.
- Alerts sent: each alert, and whether the email or phone message went out.
- Scheduler skips: when the scheduler chose not to shoot, and why (target too low, Moon too close, weather).
A card that has nothing to show for that night is left out, or says so.
"Star sizes were not measured frame by frame"
The focus chart needs a star-size measurement for each frame. Starship only measures each frame when frame quality checking is switched on. Turn it on in Settings > Frame quality. From then on each night records a full chart. Nights already past cannot be filled in afterwards.
Autofocus runs are recorded either way, so the chart may still show a few points on a night without frame quality checking.
An empty night
A night with no frames says No frames were recorded on this night. That is normal for a cloudy night, or for a night when Starship was not running. Use Last night with frames to go straight to a night that has some.
How long reports are kept
Reports are kept for a year. Older nights are removed when Starship starts.
If the page says recording is switched off
Then only the scheduler's history is shown, and frames, focus and guiding are not being recorded. Recording is on by default.
See also
- Sequencer and Scheduler for the runs that fill the report.
- Alerts to be told during the night instead of the next morning.
- Audit log for the full record of every command.